Bryston Electronic Crossover 10B LR - Manual (Page 3)

(I) (J) (K) (L) (K) (J) (I)
2
(A) MUTE SWITCH
One each for low pass and high pass filters
(B) LOW PASS FREQUENCY SELECTOR
12 selectable crossover points
(C) LOW PASS SLOPE SELECTOR
Sets low pass slope in decibels per octave
(6, 12 or 18dB/Oct.)
(D) HIGH PASS LEVEL CONTROL
Sets high pass output level for channel.
-5dB to + 5dB in 1dB steps.
(E) HIGH PASS SLOPE SELECTOR
Sets high pass slope in decibels per octave
(6, 12 or 18dB/Oct.)
(F) HIGH PASS FREQUENCY SELECTOR
12 selectable crossover points
(G) STATUS LEDS
(H) POWER SWITCH (PUSH BUTTON)
(I) INPUT RCA OR XLR (FEMALE)
(J) LOW PASS OUTPUT RCA OR XLR (MALE)
(K) HIGH PASS OUTPUT RCA OR XLR (MALE)
(L) MODE SELECTOR SWITCH
Selectable
frequencies
10B standard
Selectable 40 Hz, 50 Hz, 60 Hz, 70 Hz,
frequencies* 80 Hz, 90 Hz, 100 Hz, 200 Hz,
10B sub 250 Hz, 300 Hz, 400 Hz, 500 Hz
Slope 6/12/18 dB per Oct.
S/N ratio -90 dB
Distortion 0.005%
Input 15k ohms, unbalanced
impediance 15k ohms, balanced
Output 100 ohms
impediance
Features Stereo 2-way
Monaural 3-way
Stereo 2-way summed low pass
Balanced or unbalanced
Independent high and low pass
frequency selection
± 5dB gain on high pass section
Internal adjustments for up to ± 10 dB
Dimensions 19 or 17 x 1.75 x 10 inches,
48.25 or 43.18 x 4.44 x 25.4 cm
wt: 12 lbs, 5.5 kg
* Custom frequencies available on request
** 24 dB per octave with plug-in frequency modules also available
Balanced version also available
(B) (C) (D) (E) (F) (A) (G) (H) (A) (B) (C) (D) (E) (F) (A)
10B SWITCHING AND CONNECTIONS
70 Hz, 100 Hz, 140 Hz, 200 Hz,
300 Hz, 450 Hz, 700 Hz, 1 kHz,
2 kHz, 3 kHz, 4.5 kHz