Add fabric softener, if desired, Select cycle, Load laundry into washer – Whirlpool WTW4850BW User Manual

Page 8

Add fabric softener, if desired

Add liquid chlorine bleach

to dispenser, if desired

Do not overfill, dilute, or use more than 1 cup (250 mL). Do

not use color-safe bleach or Oxi products in the same cycle

with liquid chlorine bleach.

Turn cycle knob to choose your wash cycle.

Select cycle

Load garments in loose heaps evenly

around basket wall. For best results, do

not pack the load tightly. Do not wrap

large items such as sheets around the

agitator; load them in loose piles around

the sides of the basket. Try mixing

different sized items to reduce tangling.
IMPORTANT: Do not tightly pack or

force items into washer. Items need to

move freely for best cleaning and to reduce wrinkling

and tangling.

Load laundry into washer

Liquid

Chlorine Bleach

Pour a measured amount of liquid fabric

softener into dispenser; always follow

manufacturer’s directions for correct amount

of fabric softener based on your load size.
Dilute liquid fabric softener by filling the

dispenser with warm water until liquid reaches the underside

of the rim. See max fill line arrows.
IMPORTANT: 1 Rinse with Softener or

2 Rinses with Softener option must be

selected to ensure proper distribution of the

fabric softener during the final rinse portion

of the cycle.
Adding Liquid Fabric Softener Manually

to Wash Load
During the final rinse, wait until the washer has completed filling,

press the START/Pause button to pause the washer. Lift the lid

and add the measured recommended amount of liquid fabric

softener. Do not allow liquid fabric softener to spill, splash, drip,

or run into the basket or on load. Do not use more than the

recommended amount. Close the lid and press the START/Pause

button again to start the washer.

MAX FILL