Whirlpool W10292391 - Manual (Page 8)

8
MODIFICATIONS FOR AN ARMOIRE KIT INSTALLATION
Top Grille
1. Remove the four screws fastening each mounting plate to the
sides of the refrigerator. Discard the mounting plates but keep
the screws for attaching the two grille bracket assemblies
provided in this kit.
2. Remove the two screws fastening the air divider to the unit
housing. Discard the air divider, but replace the screws into
the holes from where they were removed.
3. Align the four holes in a grille bracket assembly with the four
holes in a cabinet side, as shown. Using the screws removed
in Step 1, attach the grille bracket assembly.
4. Repeat steps 2 and 3 to install the other grille bracket
assembly to the opposite side of the refrigerator.
Install Refrigerator
IMPORTANT: Follow the “Installation Instructions” in the
“Installation Guide” provided with your refrigerator.
1. Plug refrigerator into grounded 3 prong outlet.
2. Move the refrigerator to its final location.
Install Grille Panel
1. Position the armoire grille panel between the grille brackets on
each side of the cabinet.
2. Slide the grille panel down until the top of the grille panel
hangs on top of the offsets of the grille brackets.
A. Grille bracket mounting plate
B. Air divider
C. Grille bracket mounting plate
A. Grille bracket assembly
B. Screws
A
C
B
A
B
A. Offset in bracket
B. Grille C. Grille bracket
D. Grille bracket assembly
WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
B
C
A
D