Please close lid before grinding, Warning, User notices – Bunn G2 User Manual
Page 3
3
TURKISH
SPECIAL
R
E
G
P
E
R
C
EL
EC
PE
RC
AUT
OMATIC DRIP
FIN
E
ES
P
R
E
S
S
O
Use only on a properly protected circuit
capable of the rated load.
Electrically ground the chassis.
Follow national/local electrical codes.
Do not use near combustibles.
An extension cord, when used, must be shorter
than 20 feet if 16-gage 3-conductor wire, or
shorter than 10 feet if 18-gage 3-conductor wire.
FAILURE TO COMPLY RISKS EQUIPMENT
DAMAGE, FIRE, OR SHOCK HAZARD
READ THE ENTIRE OPERATING MANUAL
INCLUDING THE LIMIT OF WARRANTY AND
LIABILITY BEFORE BUYING OR USING THIS PRODUCT
20545-0000 7/90 © 1990 Bunn-O-Matic Corporation
WARNING
1. Select the desired grind.
2. Lift the lid and pour coffee beans into the hopper.
3. Slip bag under the chute. Rest the bag on the tray.
4. Press the start switch.
5. Flip the cleaning lever a few times as dispensing slows.
6. Remove the bag. The grinder will stop automatically.
1. Select the desired grind.
2. Lift the lid and pour coffee beans into the hopper.
3. Slip bag under the chute. Rest the bag on the tray.
4. Press the start switch.
5. Flip the cleaning lever a few times as dispensing slows.
6. Remove the bag. The grinder will stop automatically.
PLEASE DO NOT POUR GROUND
COFFEE BACK INTO GRINDER
PLEASE CLOSE LID
BEFORE GRINDING
CAUTION
PERSONAL INJURY HAZARD
Keep Fingers & Foreign Objects
out of Hopper or Chute Opening
!
11075.0000
11075.0004 (SPECIAL)
11076.0000
20545.0000
25152.0000 - G1
25153.0000 - G2 & G3
USER NOTICES
Carefully read and follow all notices on the grinder and in this manual. They were written for your protection.
All notices on the grinder are to be kept in good condition. Replace any unreadable or damaged labels.