Close the door, Switch on on/off switch, Release both buttons – Neff S41M63N1GB User Manual

Page 11: To change the setting, Press programme button 3, Press start button h, Switching off rinse aid refill indicator, Utensils, Not suitable, Glass and utensil damage

Water softening system/Special salt en

To change the setting:
1. Press programme button 3.

Each time the button is pressed, the
set value increases by one level;
when the value of

•:‹ˆ has been

reached, the display jumps back
to

•:‹‹ (off).

2. Press START button h.

The chosen setting has now been
stored.

Water hardness table

Using special salt

Always refill with special salt
immediately before switching on the
appliance. This ensures that overrun
special salt solution is immediately
washed out and does not corrode the
rinsing tank.

1. Open the screw-type cap of the

compartment 1R.

2. Fill the tank with water (only required

when switching on the appliance for
the first time).

3. Then add dishwasher salt (not table

salt or tablets).
The water is displaced and runs out.

As soon as the salt refill indicator @
on the fascia is lit, top up the salt.

* depending on model

Using detergents with salt
component

Detergents with salt component

¯¯

¯³

¯´

¯±

¯Å

:DWHU

KDUGQHVV

YDOXH

&ODUNH

VRIW

PHGLXP

KDUG

Ȣ
Ȣ
Ȣ

PPROO

Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ

6HWYDOXH

RQWKH

PDFKLQH

+DUGQHVV

UDQJH

KDUG

PHGLXP

VRIW