Belkin PLAY N600 - Manual (Page 5)

5
GettiNG starteD
1 . connect your router’s aDsl cable to your phone jack or phone-
jack adapter (microfilter) . if you are replacing an existing router
or gateway, this may require unplugging the existing gateway .
Note: if required by your internet service Provider (isP),
plug the included phone-jack adapter (microfilter) into your
wall-mounted phone jack . Please check with your provider
before connecting your router if you are unsure whether or
not you need to use the included phone-jack adapter .
2 . Plug the router’s power supply into a wall outlet .
3 . Put the cD into your computer . if the cD doesn’t
open automatically, please browse to your cD drive
and double-click on the Belkin setup cD icon .
4 . click the setup icon on the cD menu .
Setup