Belkin PLAY N600 - Manual (Page 20)

20
GettiNG to KNoW Your router
a) aDsl Connector
connect your router to a
phone jack using a telephone
cord . in some areas, a
microfilter might be required .
b) Wired (laN) Connectors
connect computers and other
wired network devices to these
ports using ethernet cables .
C) usb Port
usB printers, disks, and other
usB devices plugged into this
port will be shared on your
network . each usB port has a
light that indicates its status .
off: no usB device is
connected or the attached
usB device is not in use .
blinking: Please wait to
unplug the device until
the light turns off .
on: the usB device is
connected and being
shared on your network .
D) reset button
this button is used to restart
your router in rare cases when it
functions incorrectly . resetting
the router will preserve your
settings . this button may also
be used to restore the factory
default settings . Please see
the troubleshooting section
for more information .
e) Power Connector
connect the included power
supply to this jack .
back Panel
(a)
(b)
(c)
(d)
(e)
GettiNG to KNoW Your router