beautypg.com

Turn the temperature selector clockwise, Unlocking the appliance, Press and hold the ± button – Neff C57M70N3GB User Manual

Page 12: Turn the temperature selector until ™‚‚ appears, Press and hold the ± button. the ‚ symbol goes out, Changing the basic settings, Basic settings, Press and hold the ± button for several seconds, Care and cleaning, Risk of short circuit

background image

12

2.

Turn the temperature selector clockwise.

™‚ƒ

appears in the clock display.

3.

Press and hold the

±

button until the

symbol lights up.

Unlocking the appliance
Press the operating mode selector. Your appliance is ready for

operation.

1.

Press and hold the

±

button.

™‚ƒ

appears in the clock display.

2.

Turn the temperature selector until

™‚‚

appears.

3.

Press and hold the

±

button. The

symbol goes out.

Changing the basic settings

Your appliance has various basic settings which you can

change at any time.

Basic settings

In the table, you will find all the basic settings and options for

changing them.

Press the operating mode selector. Your appliance is ready for

operation.

1.

Press and hold the

±

button for several seconds.

The first basic setting appears on the clock display.

2.

Press the

±

button repeatedly until the required basic setting

is shown.

3.

Use the temperature selector to make the desired setting.

4.

When finished, press and hold the

±

button for several

seconds.

All settings are applied.
You can change the settings at any time.

Care and cleaning

With careful care and cleaning your microwave oven will retain

its looks and remain good order. We will explain here how you

should care for and clean your appliance correctly.

:

Risk of short circuit!

Never use high-pressure cleaners or steam cleaners to clean
the oven.

:

Risk of burns!

Never clean the appliance immediately after switching off. Let
the appliance cool down.

Notes

Slight differences in colour on the front of the appliance are

caused by the use of different materials, such as glass,

plastic and metal.

Shadows on the door panel which look like streaks, are

caused by reflections made by the oven light.

Enamel is baked on at very high temperatures. This can

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Unpleasant odours, e.g. after fish has been prepared, can be

removed very easily. Add a few drops of lemon juice to a cup

of water. Place a spoon into the container as well, to prevent

delayed boiling. Heat the water for 1 to 2 minutes at

maximum microwave power.

Cleaning agents

To ensure that the different surfaces are not damaged by using

the wrong cleaning agent, observe the information in the table.

Do not use:

any caustic or abrasive cleaning agents,

metal or glass scrapers to clean the glass in the appliance

door,

metal or glass scrapers to clean the door seal,

hard scouring pads and sponges,

cleaning agents with high concentrations of alcohol.

Rinse out new sponge cloths thoroughly before use.
For easier cleaning, you can switch on the oven light. Open the

appliance door to do so.

Basic setting

Options

Explanation

™‚

Childproof lock

= off

Childproof lock:

ƒ

= on

automatically activates the childproof lock

™ƒ

Audible signal duration:

ƒ

= medium = 2 minutes

Audible signal duration:

= short = 10 seconds

= long = 5 minutes

Signal after the cooking time has elapsed

™„

Audible signal volume:

ƒ

= medium

Audible signal volume

= low

= high

Audible signal volume

™…

Button tone:

= on

Button tone:

ƒ

= off

Confirmation tone when a button is pressed

This manual is related to the following products: