Belkin F5D7330 User Manual
Page 2
Web Interface, ‘Bridge Settings’
The Network card in the computer attached to the 7330 will receive its IP address from the
router. If DHCP is chosen in the adapter, an IP address will also be assigned to the 7330. In
order to find out what this IP address is, you will need to run the CD again, let it detect the
device. Then it will show you the IP address. Alternatively you can look in the DHCP client list
in the router (MAC address is underneath the device).
Things to remember
To reset the device, hold down the reset button for 7 seconds. The Wireless light on the front
will start flashing very quickly.
The default IP address is 192.168.2.225. In order to access the 7330 via the web manager
the IP address of the computer connected to the 7330 needs to be in the same range.
Under this section
you can configure
everything. DHCP
client is disabled by
default.
Site Survey
The page is self-explanatory. Simply tick the box
‘Join’ next to the chosen network, and then click
on Apply changes.