BenQ MP730 - Manual (Page 11)

Introduction 11
Remote control
1. Power
Toggles the projector on or off.
See
"Starting up the projector" on page 27
and "Shutting down the projector" on page
47 for details.
2. ASPECT
Selects the display aspect ratio. See
"Selecting the aspect ratio" on page 35 for
details.
3. CAPTURE
Captures the projected picture and save it
as your startup screen. See
"Creating your
own startup screen" on page 45 for details.
4. Keystone/Arrow buttons ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 34 for
details.
5. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See
"Using
the menus" on page 28 for details.
6. Left/
Starts the FAQ function. See "Utilizing
FAQ function" on page 44 for details.
7. BLANK
Used to hide the screen image. See
"Hiding
the image" on page 43 for details.
8. ENTER
Enacts the selected On-Screen Display
(OSD) menu item.
See "Using the menus"
on page 28 for details.
9. TIMER ON/SHOW
Activates or displays an on-screen timer
based on your own timer setting. See
"Setting the presentation timer" on page 41
for details.
10. BRIGHTNESS
Adjusts brightness. See
"Adjusting
Brightness" on page 38 for details.
11. CONTRAST
Adjusts contrast. See
"Adjusting Contrast"
on page 38 for details.
12. TIMER SETUP
Enters presentation timer setting directly.
See
"Setting the presentation timer" on
page 41 for details.
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
4
20
21
22
I I