BEA 80.0068.03 - Manual (Page 5)

SIZE: DRAWN BY:
TITLE: DOROMATIC ASTRO-SWING WITH
BODYGUARD, INTERFACE CHIP
A
NOTES: 1) CONNECT DOR-O-MATIC CABLE TO DOR-O-MATIC INTERFACE CHIP INSIDE B.E.A. BODYGUARD/ DK-12 AND
7-PIN CONNECTOR OF BODYGUARD OR DK-12.
2) SET FUNCTION SWITCH TO "E" PREFERED IF AVAILABLE, OR FUNCTIONS 1-2.
3) BEAMS OR SWING SIDE SUPERSCAN MUST BE USED TO ENSURE COMPLIANCE TO
ANSI 156.10
100 ENTERPRISE DRIVE
PITTSBURGH, PA 15275
PHONE: (412) 249-4100
FAX: (412) 249-4101
EMAIL: www.beasensors.com
REV BY:
KJG JDC
80.0072.04
SCALE: DATE:
NONE 20 MARCH 2006
PART NO:
SHEET
1 OF 1
BODYGUARD
ORANGE
PURPLE
BROWN
BLACK
WHITE
RED
WHITE DOR-O-MATIC
INTERFACE
CHIP
TRIM AND TAPE BLACK
AND WHITE WIRES
ON THIS CABLE ONLY
DOR-O-MATIC
SWING DOOR
CONTROL BOX
15-PIN
CONNECTOR
3-POSITION
SWITCH
IF AFTER TROUBLESHOOTING A PROBLEM, A SATISFACTORY SOLUTION CANNOT BE ACHIEVED, PLEASE CALL B.E.A., INC.
FOR FURTHER ASSISTANCE DURING EASTERN STANDARD TIME AT 1-800-523-2462 FROM 8AM - 5PM. FOR AFTER-HOURS,
CALL EAST COAST: 1-866-836-1863 OR 1-800-407-4545 / MID-WEST: 1-888-308-8843 / WEST COAST: 1-888-419-2564. DO NOT
LEAVE ANY PROBLEM UNRESOLVED. IF YOU MUST WAIT FOR THE FOLLOWING WORKDAY TO CALL B.E.A., LEAVE THE
DOOR INOPERABLE UNTIL SATISFACTORY REPAIRS CAN BE MADE. NEVER SACRIFICE THE SAFE OPERATION OF THE
AUTOMATIC DOOR OR GATE FOR AN INCOMPLETE SOLUTION.WEB: WWW.BEASENSORS.COM