BIXOLON BCD-1100 - Manual (Page 12)

Rev. 1.00 - 12 -
BCD-1100
6-3 Memory Switches
The following settings other than the DIP switch can be changed by software. These
settings become effective after the power is turned on or initialization is executed by a
command.
No. Function Default Content to be set Range to be set
Msw 10
Character code table
section
n=0 Page 0 is selected
0-5, 16-19,
254, 255
Msw 11
International character set
selection
n=0 U.S.A is selected 0-13
Msw 12 Brightness adjustment n=4 100% 1-4
Msw 13
Selection of the
peripheral devices
n=2 Display is selected 1-3
Msw 14 Cursor display Selected Selected 0, 1, 48, 49