Sharp IG-A40E-W - Manual (Page 17)

ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
Р
УССКИЙ
ENGLISH
Thank you for purchasing this SHARP Plasmacluster Ion Generator. Please
read this manual carefully before using Plasmacluster Ion Generator.
After reading, keep the manual in a convenient location for future reference.
E-1
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
..................
E-2
• WARNING ............................................................................E-2
• CAUTIONS CONCERNING OPERATION ........................... E-2
• INSTALLATION GUIDELINES .............................................E-2
PARTS NAME
.........................................................
E-3
• CONTROL PANEL ...............................................................E-3
• FIX THE OPERATION COVER BY SCREW ....................... E-3
INSTALLATION POSITION
.............................................E-4
ACCESSORIES
..................................................................E-4
HOW TO INSTALL THE UNIT
........................................ E-5
OPERATION
.......................................................................E-6
CLEANING AND MAINTENANCE
................................. E-7
• MAIN UNIT ...........................................................................E-7
• FILTER .................................................................................E-7
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT
... E-8
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT
... E-9
SPECIFICATIONS
........................................................... E-11
TROUBLESHOOTING
....................................................E-12
• While IG-A20E and IG-A40E can inactivate suspended viruses and
other contaminants, it cannot create a completely sterile environ-
ment. SHARP does not guarantee its ability to prevent microbial in-
fection.
• To enable stable emission of high-density Plasmacluster ions, the
Plasmacluster Ion Generating Unit mounted in IG-A20E and IG-A40E
have to be replaced periodically*.
* Replacement is required approximately every 2 years (17,500 hours) when operated
24 hours a day. IG-A20E and IG-A40E will stop operating after about 26 months
(19,000 hours) if the Plasmacluster Ion Generating Unit is not replaced.
IG-A20E_A40E.en.indd 3 IG-A20E_A40E.en.indd 3 2009/09/17 13:39:03 2009/09/17 13:39:03