Behringer SINGLE DIAPHRAGM CONDENSER MICROPHONE B-1 User Manual
Page 2
2
SINGLE DIAPHRAGM CONDENSER MICROPHONE B-1 User Manual
Important Safety
Instructions
Terminals marked with this
symbol carry electrical current of
sufficient magnitude to constitute
risk of electric shock. Use only high-quality
commercially-available speaker cables with
¼" TS plugs pre- installed. All other installation
or modification should be performed only by
qualified personnel.
This symbol, wherever it appears,
alerts you to the presence of
uninsulated dangerous voltage
inside the enclosure - voltage that may be
sufficient to constitute a risk of shock.
This symbol, wherever it appears,
alerts you to important operating
and maintenance instructions in
the accompanying literature. Please read
the manual.
Condenser microphones are
extremely moisture-sensitive.
Never use your microphone in
close proximity to water (e.g. bath-tubs,
wash-basins, sinks, washing machines, pools,
etc.). When doing voice recordings, always use
the enclosed popscreen to safely protect the
capsule from moisture.
Always use the power
supply specified in the
operating instructions.
Take care not to drop your
microphone as this can lead to
severe damage. BEHRINGER
assumes no liability for any damage caused by
the user.
When the microphone is not in
use, please take it out from its
elastic suspension, clean it with
a soft cloth, and then place it in its case.
Place the bag containing moisture-absorbing
crystals close to the microphone head.
Never dismount the screen
holding the capsule, as this can
damage the microphone! Never
try to modify the printed circuit board inside
your B-1! This can lead to microphone damage
that cannot be repaired. Any such attempt will
void the warranty.
Limited Warranty
Please register your new BEHRINGER
equipment right after your purchase by
visiting behringer.com and read the terms and
conditions of our warranty carefully.