Sharp EL-1611PGY User Manual

Page 13

RESETTING THE UNIT

Strong impacts, exposure to electrical fields, or other unusual
conditions may render the unit inoperative, and pressing the
keys will have no effect. If this occurs, you will have to press the
RESET switch on the bottom of the unit. The RESET switch
should be pressed only when:
• an abnormal event occurs and all keys are disabled.
• you install or replace the batteries.
Notes:
• Pressing the RESET switch will clear the stored tax rate and

other data stored in the memory.

• Use only a ballpoint pen to press the RESET switch. Do not

use anything breakable or anything with a sharp tip, such as
a needle.

• After pressing the RESET switch, press

to make sure

that “0.” is indicated.

PRINTING SECTION

Printing speed:

Heavy-duty manganese battery, size
AA (or R6)
Approx. 2.1 lines/sec. (At temperature
25°C(77°F), when “741 • 9 +” is printed.
Printing speed will vary with the
number of rows, different figure types
to be printed, and the charge level of
the batteries.)

Printing paper:

57 mm (2-1/4") – 58 mm (2-9/32") wide
80 mm (3-5/32") in diameter (max.)

Operating temperature: 0°C – 40°C (32°F – 104°F)
Power consumption:

(DC): 1.7 W

Dimensions:

99 (W) × 191 (D) × 42 (H) mm
3-29/32" (W) × 7-17/32" (D) × 1-21/32" (H)

Weight:

Approx. 238 g (0.53 lb.) (with batteries)

Accessories:

Ink roller × 1 (installed), Paper roll × 1,
Dry battery (R6) × 4 and Operation
manual