beautypg.com

Before operation microwave power level, Setting the clock – Sharp R-642BKW User Manual

Page 170

background image

GB-8

BEFORE

OPERATION

MICROWAVE POWER LEVEL

This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set the clock, see below.

SETTING

THE

CLOCK

Your oven has a 24 hour clock mode.

1. Press the CLOCK SET key

once and “00:00” will fl ash.

2. Press the time keys and enter the current time. Enter the hours by pressing the 10 MIN key and enter the

minutes by pressing the 1 MIN and 10 S keys.

3. Press the CLOCK SET key

to fi nish clock setting.

NOTES:
If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not

To check the time of day during a cooking process, press CLOCK SET key and the LED will display the time of

day for 2-3 seconds. This does not aff ect the cooking process.

In the process of clock setting, if the STOP key is pressed or if there is no operation within 1 minute, the oven

will go back to the former setting.

the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.

Power Level

Press the MICROWAVE

POWER LEVEL key

Display

(Percentage)

Your oven has 11 power levels, as shown.
To change the power level for cooking, press

the MICROWAVE POWER LEVEL key until the
display indicates the desired level. Press the
START key to start the oven.

To check the power level during cooking,

press the MICROWAVE POWER LEVEL key.
As long as your fi nger is pressing the MICRO-
WAVE POWER LEVEL
key the power level will
be displayed. The oven continues to count
down although the display will show the
power level.

If “0P” is selected, the oven will work with fan

for no power. You can use this level to remove
the odour.

HIGH

x1

100P

x2

90P

MEDIUM HIGH

x3

80P

x4

70P

MEDIUM

x5

60P

x6

50P

MEDIUM LOW
(DEFROST)

x7

40P

x8

30P

LOW

x9

20P

x10

10P

x11

0P

Generally the following recommendations apply:

100P/ 90P - (HIGH) used for fast cooking or reheating
e.g. for casseroles, hot beverages, vegetables etc.
80P/ 70P - (MEDIUM HIGH) used for longer cooking of dense
foods such as roast joints, meat loaf and plated meals, also for
sensitive dishes such as sponge cakes. At this reduced setting,
the food will cook evenly without over cooking at the sides.
60P/ 50P - (MEDIUM) for dense foods which require a
long cooking time when cooked conventionally, e.g.

beef casserole, it is advisable to use this power setting
to ensure the meat will be tender.
40P/ 30P - (MEDIUM LOW) to defrost, select this power
setting, to ensure that the dish defrosts evenly. This
setting is also ideal for simmering rice, pasta, dump-
lings and cooking egg custard.
20P/ 10P - (LOW) For gentle defrosting, e.g. cream ga-
teaux or pastry.

Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.

been set, the display will only show “0:00” when cooking is complete.

If the electrical power supply to your microwave oven is interrupted, the display will intermittently show “0:00” after

This manual is related to the following products: