Behringer gm108 - Manual (Page 5)

5
V-TONE GM108
2. WIRING HINTS
2. WIRING HINTS
The following illustrations show you how to connect your
guitar to the amp.
If you want to use stomp boxes or an effects pedal to experi-
ment with different new sounds, simply connect the guitar directly
to the input of your effects unit. Of course, you will need an
additional cable for this purpose to connect the output of the
effects unit to the amp input.
Fig. 2.1: V-TONE GM108 setup (example)
Fig. 2.2: Live setup (example)
If you own an electronic tuner, you should hook it up pre
effects unit to avoid interference.
+
Your amp’s speaker is automa tically muted when
you insert a plug into the headphone connector .
Fig. 2.2 shows how your GM108 can be connected to a sound
reinforcement system. This way, your amp can hold its turf even
when used for performing live or with a loud band.