Sharp R-982STWE - Manual (Page 240)

GB-3
WARNING:
The door, outer cabinet, oven cavity, accessories and dishes will become
very hot during operation. To prevent burns, always use thick oven gloves.
2 7 8 3
9
12 4 5 6
11
10
16
1
13
14
15
Hub (inside)
17. Turntable
(glass)
19. Coupling
18. Turntable
support
OVEN AND ACCESSORIES
ACCESSORIES:
Check to make sure the following accessories are
provided:
(17) Turntable (18) Turntable support
(19) Coupling (20) Rack
• Place the coupling into the turntable motor
shaft and then place the turntable support in
the centre of the oven floor so that it can freely
rotate around the coupling. Place the turntable
onto the turntable support so that it locates
firmly into the coupling.
• To avoid turntable damage, ensure dishes and
containers are lifted clear of the turntable rim
when removing them from the oven.
• For use of the rack, refer to the grilling sections
on page GB- 17-19 .
Never touch the grill when it is hot.
NOTE: When you order accessories, please men-
tion two items: part name and model name to
your dealer or SHARP authorised service agent.
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it
is not damaged.
• After cooking fatty foods without a cover, always clean the cavity and especially the grill heating ele-
ment thoroughly, these must be dry and free from grease. Built-up grease may overheat and begin to
smoke or catch fire.
• Always operate the oven with the turntable and turntable support fitted correctly. This promotes
thorough, even cooking. A badly fitted turntable may rattle, may not rotate properly and could cause
damage to the oven.
• All food and containers of food are always placed on the turntable for cooking.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you
start the oven. This does not affect cooking performance.
OVEN
1.
Door
2. Door hinges
3. Oven lamp
4. Waveguide cover (DO NOT REMOVE)
5. Coupling
6. Oven cavity
7. Convection fan (covered)
8. Grill heating element (under the ceiling)
9. Control panel
10. Door latches
11. Door seals and sealing surfaces
12. Door safety latches
13. Ventilation
openings
14. Outer cabinet
15. Power supply cord
16. Door
handle
20. Rack