Behringer Eurorack Pro RX1202FX - Manual (Page 14)

14
EURORACK PRO RX1202FX
BEHRINGER is constantly striving to manintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
5. SPECIFICATIONS
MONO INPUTS
MIC (IMP Invisible Mic Preamp)
Type
XLR, electr. balanced
Mic E.I.N. (20 Hz – 20 kHz)
@ 0
Ω source resistance -132 dB / -134 dB A-weighted
@ 50 Ω source resistance -130 dB / -132 dB A-weighted
@ 150 Ω source resistance -128 dB / -130 dB A-weighted
Frequency response <10 Hz – 200 kHz
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 k Ω balanced
Signal-to-noise ratio -110 dB / -112 dB A-weighted
Distortion (THD+N) 0.003%, A-weighted
LINE IN
Type
¼” TRS connector,
electronically balanced
Impedance approx. 20 k Ω balanced
10 k Ω unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB gain
STEREO INPUTS
Type
¼” TRS connector,
electronically balanced
Impedance approx. 20 k Ω balanced
10 k Ω unbalanced
Max. input level +22 dBu
INSERT
Type
¼” TRS connector
(Tip=Send, Ring=Return)
AUXILIARY INPUTS
CD/TAPE IN
Type
RCA connectors, unbalanced
Impedance approx. 20 k Ω
Max. input level +22 dBu
AUX RETURN
Type
¼” TRS connector, balanced
Impedance approx. 20 k Ω balanced
10 k Ω unbalanced
Max. input level +22 dBu
OUTPUTS
AUX SENDS (FX)
Type
¼” TRS connector, impedance
balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
AUX SENDS (MON)
Type
¼” TRS connector, impedance
balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
MAIN OUT
Type
XLR connectors, balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +28 dBu balanced
+22 dBu unbalanced
CTRL OUT
Type
¼” TRS connector, impedance
balanced
Impedance approx. 240 Ω balanced
120 Ω unbalanced
Max. output level +22 dBu
CD/TAPE OUT
Type
RCA connectors, unbalanced
Impedance approx. 1 k Ω
Max. output level +22 dBu
PHONES
Type
¼” TRS connector
Max. output level +19 dBu / 150 Ω (316 mW)
EQ
L o w
100 Hz / ±15 dB
High 12 kHz / ±15 dB
MAIN MIX SYSTEM DATA 1
Noise
Main mix @ -oo,
Channel fader -oo
-98 dB / -101 dB A-weighted
Main mix @ 0 dB,
Channel fader -oo
-85 dB / -88 dB A-weighted
Main mix @ 0 dB,
Channel fader @ 0 dB
-77 dB / -80 dB A-weighted
Fade attenuation 2
(Crosstalk attenuation)
Main fader closed
90 dB
Channel fader closed 90 dB
Frequency response
Microphone input to Main Out
<20 Hz – 105 kHz
+1 dB / -1 dB
<10 Hz – 170 kHz +3 dB / -3 dB
EFFECTS SECTION
Converter
24-bit Sigma-Delta
Frequency rate 40 kHz
Presets 100
POWER SUPPLY
Power consumption
18 W
Voltage 100 – 240 V~, 50/60 Hz
Fuse 100 – 240 V~: T 1.6 A H 250 V
Mains connection IEC (power) cable
DIMENSIONS/WEIGHT
RX1202FX
Dimensions (H x W x D)
approx. 5 1/5” x 19” x 5 9/10”
(133 mm x 482 mm x 150 mm)
Weight (net) approx. 6.4 lbs. (2.9 kg)
Measuring conditions:
1: 20 Hz – 20 kHz; measured at main output.
Channels1 – 8 gain @ unity; EQ flat; all channels on main mix; channels 1/3/5/7
leftmost, channels 2/4/6/8 rightmost. Reference = +6 dBu.
2: 1 kHz relative to 0 dBu; 20 Hz – 20 kHz; line input; main output; gain @ unity.
5. SPECIFICATIONS