Sharp MX-2314N - Manual (Page 6)

6
SUPPLIES
Standard supplies for this product that can replaced by the user include paper, toner cartridges,
and staple cartridges for the finisher.
Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge,
and transparency film.
The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the
termination of production. Spare parts are those parts of the machine which may break down within
the scope of the ordinary use of the product, whereas those parts which normally exceed the life
of the product are not to be considered as spare parts. Consumables too, are available for 7 years
following the termination of production.
� Proper storage
1. Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper may curl or become damp,
resulting in paper misfeeds.
� Storing toner cartridges
Store a new toner cartridge box horizontally with the top side up. Do not store a toner cartridge
standing on end. If stored standing on end, the toner may not distribute well even after shaking the
cartridge vigorously, and will remain inside the cartridge without flowing out.
� Staple cartridge
The finisher require the following staple cartridge:
MX-SCX1 (for finisher)
Approx. 5000 per cartridge x 3 cartridges
GENUINE SUPPLIES
For best copying results, be sure to use only Sharp Genuine Supplies which
are designed, engineered, and tested to maximize the life and performance
of Sharp products. Look for the Genuine Supplies label on the toner
package.
Storage of supplies
Supply of spare parts and consumables
Acoustic noise emission (measurement according to ISO7779)
Noise emission values
Sound power level L
WA d
MX-2314N MX-2614N MX-3114N
Operating (continuous printing) 7.2 B 7.12 B 7.22 B
Standby mode (Low power level mode) - - -
Sound pressure level L pAm
MX-2314N MX-2614N MX-3114N
Operating
(continuous printing)
Bystander positions 55 dB 54 dB 55 dB
Standby mode Bystander positions 17 dB - -
• Operating: with option MX-DE14 and MX-FN17. (MX-2314N)
with option MX-DE14. (MX-2614N/MX-3114N)
• Standby: “-”=less than background noise.