Supplies, Noise emission, Noise emission values – Sharp MX-M364N User Manual
Page 6: Safety data sheet
6
SUPPLIES
Standard supplies for this product that can replaced by the user include paper, toner cartridges, and
staple cartridges for the finisher.
Be sure to use only SHARP-specified products for the toner cartridges, finisher staple cartridge, and
transparency film.
The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of
production. Spare parts are those parts of the machine which may break down within the scope of the ordinary
use of the product, whereas those parts which normally exceed the life of the product are not to be considered
as spare parts. Consumables too, are available for 7 years following the termination of production.
�
Proper storage
1. Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper may curl or become damp, resulting
in paper misfeeds.
�
Storing toner cartridges
Store a new toner cartridge box horizontally with the top side up. Do not store a toner cartridge
standing on end. If stored standing on end, the toner may not distribute well even after shaking the
cartridge vigorously, and will remain inside the cartridge without flowing out.
• Store the toner in a location that is cooler than 40°C (104°F). Storage in a hot location may cause
the toner in the cartridge to solidify.
• Please use SHARP-recommended toner cartridges. If toner cartridges other than
SHARP-recommended toner cartridges are used, the machine may not attain full quality and
performance and there is a risk of damage to the machine.
GENUINE SUPPLIES
For best copying results, be sure to use only Sharp Genuine Supplies which
are designed, engineered, and tested to maximize the life and performance
of Sharp products. Look for the Genuine Supplies label on the toner
package.
Storage of supplies
Supply of spare parts and consumables
Noise emission
Noise emission values
The following shows noise emission values as measured according to ISO7779.
Sound power level L
WA
d
MX-M364N
MX-M464N
MX-M564N
Operating (continuous printing)
7.4 B
7.5 B
7.6 B
Standby mode (Low power level mode)
-
-
-
Sound pressure level L
pAm
MX-M364N
MX-M464N
MX-M564N
Operating
(continuous printing)
Bystander positions
57 dB
58 dB
59 dB
Standby mode
Bystander positions
-
-
-
• Operating: With options MX-DE14, MX-RB22, MX-FN11.
• Standby: “-”=less than background noise.
�
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007)
SAFETY DATA SHEET
The SDS (Safety Data Sheet) can be viewed at the following URL address:
http://www.sharp-world.com/corporate/eco/env-info/sds/index.html
�
Staple cartridge
The finisher and saddle finisher require the following staple cartridge:
MX-SCX1 (for finisher and saddle finisher)
Approx. 5000 per cartridge x 3 cartridges
AR-SC2 (for finisher (large stacker) and saddle stitch finisher (large stacker))
Approx. 5000 per cartridge x 3 cartridges
AR-SC3 (for saddle stitch of saddle stitch finisher and saddle stitch finisher (large stacker))
Approx. 2000 per cartridge x 3 cartridges