Sharp MX-M364N - Manual (Page 10)

10
SPECIFICATIONS
Basic Specifications / Copier specifications
Name MX-M364N/MX-M464N/MX-M564N
Type Desktop
Colour Monochrome
Copier system Laser electrostatic copier
Scanning resolution
Scan (Document glass): 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpi
Scan (Document Feeder): 600 × 600 dpi, 600 × 400 dpi
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi
Gradation Scan: equivalent to 256 levels / Print: equivalent to 256 levels
Original paper sizes Max. A3 (11"×17") / sheets, bound documents
Copy sizes
A3 wide (12" × 18") to A5R (5-1/2" × 8-1/2"R), Envelopes
Tray : A3, B4, A4, A4R, B5, B5R, A5R, 11" Ч 17", 8-1/2" Ч 14",
8-1/2" Ч 13-1/2", 8-1/2" Ч 13-2/5", 8-1/2" Ч 13", 8-1/2" Ч 11",
8-1/2" Ч 11"R, 7-1/4 × 10-1/2"R, 5-1/2" × 8-1/2"R
Multi-bypass tray: A3 wide (12" × 18") to A5R (5-1/2" × 8-1/2"R),
Envelopes, Custom
Lost margin (leading edge): 4 mm (11/64”) ± 1 mm (± 3/64”)
Lost margin (trailing edge): 5 mm (13/64”) or less
Near edge / far edge: total 4 mm (11/64”) ± 2 mm (± 6/64”) or less
Paper type
Tray: Plain paper, Heavy paper (106 g/m 2 (28 lbs. bond) to 220 g/m 2
(80 lbs. Cover))
Multi-bypass tray: Plain paper, Heavy paper, Thin paper, Special paper
(Envelopes, Label, Glossy paper, Tab paper, Transparency film)
Warm-up time
12 seconds

This may vary depending on the ambient conditions.
First-copy time
MX-M364N MX-M464N MX-M564N
4.5 seconds
3.9 seconds 3.7 seconds
 This may vary depending on the state of the machine.
 Portrait feeding of A4 (8-1/2" x 11") sheets.
Continuous copying speeds*
(when shifter is not in operation)
MX-M364N MX-M464N MX-M564N
A4, B5, 8-1/2" × 11" 36 copies/min. 46 copies/min. 56 copies/min.
A4R, 8-1/2" × 11"R,
25 copies/min. 32 copies/min. 35 copies/min.
B5R, 7-1/4" × 10-1/2"R
B4, 8-1/2" × 14"
20 copies/min. 26 copies/min. 30 copies/min.
A3, 11" × 17" 17 copies/min. 22 copies/min. 26 copies/min.
* Continuous speed for same original source. Output may be temporarily
interrupted to stabilize image quality.
Copy rations
Same size: 1:1 ± 0.8 % Enlarge: 115 %, 122 %, 141 %, 200 %, 400 %
Reduce: 25 %, 50 %, 70 %, 81 %, 86 %
Zoom range: 25 to 400 % (25 - 200 % using RSPF) in 1 % increments,
total 376 increments.
Paper feed / capacity
500 sheets in one tray plus 100-sheet multi-bypass tray

Using 80 g/m 2 (21 lbs.) weight paper
Max. paper feed / max. capacity
6,600 sheets in 4 trays (500 × 2 + 1,150 + 850) plus 100-sheet multi-bypass
tray plus 3,500 sheets in large capacity tray

Using 80 g/m 2 (21 lbs.) weight paper
Continuous copy Max. 999 copies
Memory
Standard: 3 GB HDD: 320 GB

1 GB = One billion bytes when referring to hard drive capacity. Actual
format capacity is less.
Ambient
environment
Operating
environment
10 °C (54 °F) to 35 °C (91 °F) (20 % to 85 % RH) 590 - 1,013 hpa
Standard
environment
20 °C (68 °F) to 25 °CF (77 °) (65 ± 5 % RH)
Required power supply
Local voltage ± 10 % (For the power supply requirements, see the name
plate in the lower corner of the left side of the machine.)
Power consumption Max. 1.84 kW (220-240 V) / 1.44 kW (100-127 V)
(including options)
Dimensions
608 mm (W) × 690 mm (D) × 837 mm (H)
(23-15/16” (W) × 27-11/64” (D) × 32-61/64” (H))
Weight
MX-M364N MX-M464N / MX-M564N
Approx. 64 kg (141.1 lbs.) Approx. 65 kg (143.3 lbs.)
Overall
dimensions
With multi-bypass
tray extended
922 mm (W) × 690 mm (D) (36-5/16” (W) × 27-11/64” (D))
With right side
exit tray extended
985 mm (W) × 690 mm (D) (38-25/32” (W) × 27-11/64” (D))
Document feeder types Reversing Single Pass Feeder (RSPF)
Original paper sizes A3 (11" × 17") to A5 (5-1/2" × 8-1/2")
Original paper types
Paper weight Thin paper 35 g/m 2 (9 lbs. bond) to 49 g/m 2 (13 lbs. bond)
Plain paper 50 g/m 2 (13 lbs. bond) to 128 g/m 2 (34 lbs. bond)
Two-sided 50 g/m 2 (13 lbs. bond) to 105 g/m 2 (28 lbs. bond)
Paper storage capacity
100 sheets (80 g/m 2 (21 lbs.)) (or maximum stack height of 13 mm
(1/2"))
Scan speed (copy)
56 sheets/minute (600 × 400 dpi)

When scanning one-sided, A4 (8-1/2” × 11”) vertical documents
Automatic document feeder