Bang & Olufsen BeoVision MX TV - Manual (Page 16)

16
Using your MX TV
Switches on the TV programnumber
you were last watching
Press to step through your
programnumbers
Selects specific programnumbers;
press 0 alone to switch to the
programme you were last on
Raises the volume
Lowers the volume
Press right on the middle of the
volume button to silence the
speakers immediately
Press again to recall the sound
Press until CLOCK is displayed
The time is displayed on-screen
permanently
Press again to remove the display
Press until STAND is displayed
Press to turn to the left
Press to turn to the right
Key in the number of a position
Press 0 to turn the TV to the preset
On position
Press to switch to standby
The operations described on this page
are functions you will be using daily.
When you select a TV station, the
program number and name appear
briefly on the screen. If you want to
see the them again, press TV.
You can adjust volume at all times. For
details of sound adjustment, see pages
26-28.
You can check or display the time on
the screen permanently. See page 12
for information of how to set the
clock.
If your TV is mounted on a motorised
stand or base, you can turn the TV by
up to 35 degrees to either side. The TV
will turn to a preset position when you
switch it on. You can preset such a
position yourself, see page 14.
You can, furthermore, turn the TV to 9
different preset positions, use the
numbers 1-9 on Beo4, 1 is the utmost
left position and 9 is the utmost right
position.
Pressing the standby button switches
the system to standby.
TV
GO
GO
or
tt
ss
0
9
through
1
9
through
•
or
TV LIGHT RADIO
SAT DVD CD
V TAPE RECORD A TAPE
7 8 9
4 5 6
TEXT 0 MENU
1 2 3
LIST EXIT
STOP
GO
D A I L Y O P E R A T I O N S
LIST
LIST
then
Alternatively,