Bang & Olufsen BeoVision MX TV - Manual (Page 14)

S T A N D
14
Presetting a stand position
If your MX TV is mounted on a
motorised stand or base, the TV will
turn to a preset position when you
switch it on.
You can, however, preset a position
yourself so that the TV automatically
turns to a position which suits your
favourite viewing angle.
To do so, call up the Stand menu, turn
the TV and choose the On position you
want the TV to turn to and store it.
To check that it turns to the correct
position, switch the TV to standby and
switch it back on again.
Press to call up the main menu
The main menu appears…
Press until Setup is lit up
Press to call up the Setup menu
The Setup menu appears…
Press until Stand is lit up
Press to call up the Stand menu
The Stand menu appears…
Press to turn the TV to your
preferred position
Use the number keys 1-9 to select
a preset stand position, 1 is the
utmost left position and 9 the
utmost right position
Press GO to store it
Press to remove the menus
MENU
1
9
EXIT
GO
then
through
Menu
• TV program list
• Sound
• Picture
• Setup
Turn TV to preferred position
Setup
• Tuning
• Timer
• Clock
• Sockets
• Stand
The main menu
The Setup menu
The Stand menu – prompts you to turn the TV to
your desired position
To preset an On position yourself…
GO
then
then
Or
GO
then
or
tt
ss