Sharp MX-5140N - Manual (Page 22)

22
Network Scanner Specifications
Type Colour scanner
Scan resolution (main × vertical)
100 × 100 dpi, 150 × 150 dpi, 200 × 200 dpi, 300 × 300 dpi,
400 × 400 dpi, 600 × 600 dpi (push scan)
50 to 9,600 dpi *1 (pull scan)
Scan speed
(A4 (8-1/2" × 11"))
B/W:
Colour:
Reversing Single Pass Feeder (RSPF)
51 sheets/minute (one-sided)
51 sheets/minute (one-sided)
Duplex Single Pass Feeder (DSPF)
85 sheets/minute (200 × 200 dpi)
(one-sided)
85 sheets/minute (200 × 200 dpi)
(one-sided)
When in standard mode using Sharp standard paper (A4 (8-1/2" × 11") size
with 6% coverage) and the auto colour detector is turned off. The speed
varies depending on the data volume of the original.
Interface
10BASE-T/100BASE-TX/1000BASE-T,
USB 2.0 (when an external memory device is used)
Compatible protocols TCP/IP (IPv4)
Compatible OS *2
Pull scan (TWAIN) Windows XP, Windows Server 2003, Windows Vista,
Windows Server 2008, Windows 7, Windows 8,
Windows Server 2012
Output format
(B/W)
TIFF, PDF, PDF/A, encrypted PDF, XPS
Compression method: decompression, G3 (MH), G4 (MMR)
(Grey scale/colour)
TIFF, JPEG, PDF, PDF/A, encrypted PDF, high compression PDF*4, XPS*3
Compression method: JPEG (high, mid, and low compression, Emphasis black
letter)
Driver TWAIN compliant
*1: You must decrease the scan size when increasing the resolution.
*2: There are cases when a connection cannot be established. Please contact your local dealer for more information.
*3: XPS stands for XML Paper Specifi cation.
*4: Optional Enhanced Compression kit (MX-EB11) is required for MX-4140N/MX-5140N.
Wireless LAN Specifications
Type Built-in type
Compliance standards
ARIB STD-T66 (IEEE 802.11b/g) Low Power Data Communication System
Standard
Wireless LAN Standard Protocol IEEE802.11n/g/b
Transmission method OFDM (IEEE 802.11n/g), DS-SS (IEEE 802.11b)
Transmission frequency range IEEE802.11n/g/b:2.4GHz (1 - 13ch)
Transmission speed
(value of standard) *1
IEEE802.11n max. 150 Mbps
IEEE802.11g max. 54 Mbps
IEEE802.11b max. 11 Mbps
Security WEP, WPA-PSK, WPA-EAP*2, WPA2-PSK, WPA2-EAP*2
This function may not be available in some regions.
*1: The indicated values are maximum theoretical values for the Wireless LAN Standard. The values do not indicate
actual data transmission speeds.
*2: Cannot be used in Access Point mode.