Sharp MX-5140N - Manual (Page 21)

21
Type Built-in type
Continuous print speed Same as continuous copy speed
Resolution
Data processing: 600 × 600 dpi, 1,200 × 1,200 dpi
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi, 1,200 × 1,200 dpi
Page description language Standard: PCL6 emulation, Adobe ® PostScript ® 3™, XPS*
Compatible protocols TCP/IP (IPv4/IPv6), IPX/SPX, IPP, EtherTalk
Compatible OS
Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008,
Windows 7, Windows 8, Windows Server 2012
Macintosh (Mac OS X 10.4, 10.5, 10.6, 10.7, 10.8)*
Internal fonts 80 fonts for PCL, 136 fonts for Adobe ® PostScript ® 3™
Memory Machine system memory and hard disk
Interface 10BASE-T/100BASE-TX/1000BASE-T, USB 2.0 (high speed mode)
* XPS stands for XML Paper Specifi cation. When equipped with the XPS expansion kit (MX-PUX1).
Network Printer Specifications
Fax Specifications
Name Facsimile expansion kit (MX-FX11)
Useable lines General phone lines (PSTN), private branch exchange (PBX)
Scanning line density
Normal characters: 8 dot/mm × 3.85 chars/mm
Small characters: 8 dot/mm × 7.7 line/mm
Fine characters: 8 dot/mm × 15.4 line/mm
High-defi nition: 16 dot/mm × 15.4 line/mm
Connection speed Super G3: 33.6 kbps, G3: 14.4 kbps
Coding method MH, MR, MMR, JBIG
Connection mode Super G3 / G3
Original paper sizes for transmission
A3 (11" × 17") to A5 (5-1/2" × 8-1/2") (Paper with a max. length of
1,000 mm can be transmitted (one-sided and B/W only).)
Registered paper size A3 (11" × 17") to A5 (5-1/2" × 8-1/2")
Transmission time
Approx. 2 seconds *1 (A4 (8-1/2" × 11") Sharp standard paper, normal
characters, Super G3 (JBIG))
Approx. 6 seconds (G3 ECM)
Memory 1 GB
Notes
Touch dial memory Max. of 2,000 entries (Including group dialling for fax,
scanner, and Internet fax)
Entries per group Max. of 500 entries
Mass transmissions Max. of 500 recipients
*1 Complies with the 33.6 kbps transmission method for Super G3 facsimiles standardized by the International
Telecommunications Union (ITU-T). This is the speed for when sending an A4 (8-1/2" × 11") size piece of paper of
around 700 characters at standard image quality (8 × 3.85 chars/mm) in Hi-speed mode (33.6 kbps). This is the
transmission speed for image information only and does not include time for transmission control. The actual time
needed for a transmission depends on the content of the text, type of receiving fax machine, and telephone line
conditions.
Punch module (for saddle finisher)
Name
Punch module for MX-FN18
MX-PNX6A, MX-PNX6B, MX-PNX6C,
MX-PNX6D
Punch module for MX-FN10
MX-PNX5A, MX-PNX5B, MX-PNX5C,
MX-PNX5D
Paper size for punch module A3 (11" × 17") to A4 (8-1/2" × 11")
Holes
MX-PNX6A 2 holes, MX-PNX6B 3 holes
MX-PNX6C 4 holes, MX-PNX6D 4 holes (wide)
MX-PNX5A 2 holes, MX-PNX5B 3 holes
MX-PNX5C 4 holes, MX-PNX5D 4 holes (wide)
Required power supply Supplied from saddle fi nisher
Dimensions
115 mm (W) × 600 mm (D) × 995 mm (H)
(4-17/32" (W) × 23-5/8" (D) × 39-11/64" (H))
122 mm (W) × 604 mm (D) × 248 mm (H)
(4-13/16" (W) × 23-25/32" (D) × 9-49/64"
(H))
Weight Approx. 8 kg (17.6 lbs.) Approx. 3.5 kg (7.7 lbs. or less)
SPECIFICATIONS