Sharp AR-5618 - Manual (Page 3)

EN2
SPECIFICATIONS
* 1 First-copy time is measured with original on the document glass with the
following settings made, in fully ready condition with fuser at operating
temperature and mirror motor at operating speed, actual time may vary based on
environment conditions.
• A4 (8-1/2" x 11") size paper is fed from paper tray 1
• Exposure mode is AUTO
• Scanning resolution is 400 x 300 dpi
* 2 With optional document cover installed
* 3 With optional SPF installed
* 4 With optional RSPF installed
*5 With optional SPF/RSPF installed
Acoustic noise emission (measurement according to ISO7779)
Emission density (measured according to RALUZ122: Edition
Jun.2006)
Ambient environment
INFORMATION ON DISPOSAL
Attention: Your product is marked with this symbol. It
means that used electrical and electronic products
should not be mixed with general household waste.
There is a separate collection system for these
products.
A. Information on Disposal for Users (private
households)
1. In the European Union
Attention: If you want to dispose of this equipment,
please do not use the ordinary dust bin!
Used electrical and electronic equipment must be
treated separately and in accordance with legislation
that requires proper treatment, recovery and recycling
of used electrical and electronic equipment.
Following the implementation by member states,
private households within the EU states may return their used electrical and
electronic equipment to designated collection facilities free of charge*. In some
countries* your local retailer may also take back your old product free of charge if
you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please
dispose of these separately beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes
the necessary treatment, recovery and recycling and thus prevent potential negative
effects on the environment and human health which could otherwise arise due to
inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for
the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of
charge to the dealer, even if you don't purchase a new product. Further collection
facilities are listed on the homepage of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users.
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the
product. You might be charged for the costs arising from take-back and recycling.
Small products (and small amounts) might be taken back by your local collection
facilities.
For Spain: Please contact the established collection system or your local authority
for take-back of your used products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for
the correct method of disposal.
Model
AR-5618/
AR-5618D
AR-5620/
AR-5620D
AR-5623/
AR-5623D
Type Digital Multifunctional System, Desktop
Photoconductive
type
OPC drum
Document glass type Fixed
Copy system Dry, electrostatic transfer
Originals Sheets, bound documents
Original sizes Max. A3 (11" x 17")
Copy size
Max. A3 (11" x 17")
Min. A6 (5-1/2" x 8-1/2") (A6 must be fed from the bypass tray)
Image loss: Max. 4 mm (5/32") (leading and trailing
edges)
Max. 6 mm (1/4") (along other edges in total)
Copying speed
(one-sided copying
at 100% copy ratio)
• 11 (10) copies/min.
A3 (11" x 17")
• 12 (12) copies/min.
B4 (8-1/2" x 14",
8-1/2" x 13")
• 14 (15) copies/min.
A4R (8-1/2" x 11"R)
• 16 copies/min.
B5R
• 18 (18) copies/min.
A4, B5, A5
(8-1/2" x 11",
5-1/2" x 8-1/2")
• 11 (10) copies/min.
A3 (11" x 17")
• 12 (12) copies/min.
B4 (8-1/2" x 14",
8-1/2" x 13")
• 14 (15) copies/min.
A4R (8-1/2" x 11"R)
• 16 copies/min.
B5R
• 20 (20) copies/min.
A4, B5, A5 (8-1/2" x
11", 5-1/2" x 8-1/2")
• 12 (11) copies/min.
A3 (11" x 17")
• 13 (13) copies/min.
B4 (8-1/2" x 14",
8-1/2" x 13")
• 15 (16) copies/min.
A4R (8-1/2" x 11"R)
• 18 copies/min.
B5R
• 23 (23) copies/min.
A4, B5, A5 (8-1/2" x
11", 5-1/2" x 8-1/2")
Continuous copy Max. 999 copies; subtractive counter
First-copy time* 1 Approx. 7.2 sec. or less
Approx. 5.9 sec.
or less
Warm-up time Approx. 25 sec.
Copy ratio
Variable: 25% to 400%, in 1% increments (total 376 steps)
(50% to 200% when SPF/RSPF is used.)
Fixed preset: 50%, 70%, 81%, 86%, 100%, 115%, 122%,
141%, 200%
(50%, 64%, 77%, 95%, 100%, 121%, 129%,
141%, 200%)
Exposure system
Document glass: Moving optical source, slit exposure
(stationary platen) with automatic exposure
SPF/RSPF: Moving original
Paper feed
One automatic
feeding paper tray
(250 sheets) +
bypass tray (100
sheets)
Two automatic feeding paper trays
(250 sheets each) + bypass tray (100
sheets)
Fusing system Heat rollers
Developing system Dry-type two-component magnetic brush development
Light source Cold cathode fluorescent lamp
Resolution 600 x 600 dpi
Gradation
Scanning: 256
Printing: 2 value
Power supply
Local voltage ±10% (For this machine's power supply
requirements, see the name plate located on the back of
the machine.)
Power consumption Max. 1.2 kW
Weight
AR-5618: Approx. 28.6 kg (63.0 lbs.) *2
Approx. 32.2 kg (71.0 lbs.) *3
AR-5618D: Approx. 29.2 kg (64.4 lbs.) *2
Approx. 33.0 kg (72.8 lbs.) *4
AR-5620/AR-5623: Approx. 33.8 kg (74.5 lbs.) *2
Approx. 37.4 kg (82.5 lbs.) *3
AR-5620D/AR-5623D: Approx. 34.4 kg (75.8 lbs.) *2
Approx. 38.2 kg (84.2 lbs.) *4
Dimensions
(W) x (D) x (H)
AR-5618/AR-5618D:
591 mm x 567 mm x 495 mm (23-17/64" x 22-21/64" x 19-31/64")
*2
591 mm x 567 mm x 590 mm (23-17/64" x 22-21/64" x 23-15/64") *5
AR-5620/AR-5623/AR-5620D/AR-5623D:
591 mm x 567 mm x 595 mm (23-17/64" x 22-21/64" x 23-27/64")
*2
591 mm x 567 mm x 690 mm (23-17/64" x 22-21/64" x 27-7/16") *5
Model
AR-5618/
AR-5620/
AR-5623
AR-5618D/
AR-5620D
AR-5623D
Sound power level Lw A
Printing mode (continuous printing) 6.5 B 6.6 B 6.8 B
Standby mode - - -
Sound pressure level Lp A (actual measurement)
Printing mode Bystander positions 48 dB 49 dB 52 dB
Standby
mode
Bystander positions - - -
As a part of our policy of continuous improvement, SHARP reserves the right to
make design and specification changes for product improvement without prior
notice. The performance specification figures indicated are nominal values of
production units. There may be some deviations from these values in individual
units.
85%
60%
20%
10°C
(54°F)
30°C
(86°F)
35°C
(91°F)
(Humidity)
(Temperature)
AR-5618_5623D_StartGuide_EX.book Page 2 Friday, March 4, 2011 11:44 AM