Beko WMXD 760 S - Manual (Page 20)

EN 20
light will light up according to the
selected program.
Changing the delay time
If you want to change the time during
the countdown:
1. Press “Start/Pause/Cancel” button.
The “:” in the middle of the screen
will stop flashing.
2. Press “Time Delay” (+/-) button to
adjust the desired time delay.
3. Press “Start/Pause/Cancel” button.
4. The “:” in the middle of the displayed
time delay will start to flash.
Cancelling the time delay
If you want to cancel the time delay
countdown and start the program:
1. Press “Start/Pause/Cancel” button.
The “:” in the middle of the displayed
time delay will stop flashing.
2. Press “Time Delay” (-) button to
decrease the time delay. “0” will
appear on the display.
3. Press "Start/Pause/Cancel" button
to start the program.
Starting the Program
1. Press "Start/Pause/Cancel" button
to start the program.
2. Program follow-up lamp showing
the startup of the program will light
up.
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step,
the relevant indicator lamp will light up.
The indicator that is lit up at the bottom
of the series of symbols indicates the
step that is being carried out.
C If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated due
to an excessive unbalanced
distribution of laundry in the
machine.
Changing the selections after
the program has started
Turning the program knob while the
program is in a normal flow will not
change the program.
Switching the machine to standby
mode
Press “Start/Pause/Cancel” button
momentarily to switch your machine to
the standby mode. “Pause” lamp (II) will
light up to indicate that the machine is
switched to standby mode.
Selecting or cancelling an auxiliary
function in standby mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/removing laundry in standby
mode
The door can be opened if the water
level is suitable. Laundry may be added
/ taken out by opening the door.
Child-proof lock
You can protect your machine from
being tampered by children by means
of the child-proof lock. In this case, no
change can be made in the running
program.
The machine is switched to child-lock
by pressing the 2nd and 4th auxiliary
functions from top for 3 sec. “CL“
(Child lock is activated) label appears
on the screen. The same symbol will
also be displayed whenever any button
is pressed while the machine is child-
locked.
Lamp of the first auxiliary function from
the top will flash when the child-proof
lock is activated.
To deactivate the child-proof lock,
press the 2nd and 4th auxiliary function
buttons for 3 sec. “CL“ (Child-proof lock
is deactivated) label appears on the
screen. Lamp of the auxiliary function
will fade if it is not selected when the
child-proof lock is deactivated.