Emerson Radio Barbie TUNE BLOSSOM BAR100 - Manual (Page 9)

POWER SOURCES
8
This CD player requires either two (2) “AA” batteries (not included) or an AC
adapter (not included).
BATTERY INSTALLATION
The Battery indicator ( ) will appear in the CD display when the batteries
need replacing.
1. Open the Battery Compartment door by
pressing in on the tab and then lifting it. To
prevent the possibility of losing the cover, it
cannot be removed.
2. Insert two (2) “AA” batteries (not included)
according to the polarity diagram inside the
battery compartment. Alkaline batteries are
recommended for the longest playing time.
AC OPERATION
To operate the unit using AC power, connect an AC adapter (not included)
to an AC outlet having 120V, 60Hz AC only. Plug the small end into the
DC4.5V z jack on the side of the unit and connect the other end into
the AC outlet. The batteries are automatically disconnected when the AC
adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from the
wall outlet by pulling the plug (not the cord). Do not touch the AC adapter
with wet hands. Fully insert the plug without exposing any part of the blade.
–
+
–
+