BenQ PB8250 - Manual (Page 14)

Introduction 8
Controls and Functions
External Control Panel
1
2
3
9
8
4
11
10
5
7
6
12
13
1. Power (Refer to pages 17 for mor for more
information.)
Turns the projector on or off.
2. Source (Refer to page 20 for mo more
information.)
Sequentially selects the input signal
RGB, DVI, YP
b P r, S-Video or Video.
3. Left
4. Right
When the on-screen menu is not
activated, #3 and #4 function as
Ke
Keystone -/+ -/+ hot keys.
Refer to page 19 for mor more information.
5. Exit
Exits and saves the menu settings.
6. Me Menu
Turns the on-screen display control
menu on.
When the on-screen menu is activated,
the #3 to #6 buttons are used as
directional arrows to select the desired
menu items and to make adjustments.
Refer to page
25 for mor more information.
7. Auto (Refer to page 20 for more infor-
matio mation.)
Automatically determines the best
picture timings for the displayed
image.
8. Blank (Refer to page 21 for more infor-
ma mation.)
Used to hide the screen image. You can
press Bl
Blank again or Re Return to bring
the image back.
9. Power indicator light
Lights up or flashes when the projector
is under operation.
10. Temperature warning light (Refer to
page
38 for mor more information.)
Flashes red if the projector’s
temperature becomes too high.
11. Lamp indicator light (Refer to page 36
for more information.)
Indicates the status of the lamp. Lights
up or flashes when the lamp has
developed a problem.
12. Zoom r om ring
Adjusts the size of the image.
Rotate clockwise to enlarge the image
or rotate counter-clockwise to make
the image smaller.
13. Focus ring
Adjusts the focus of the projected
image.