Brother BCL-D10 - Manual (Page 36)

Chapter 4
25
Replacing the battery
4
If your battery performance is getting worse,
make sure that you have charged the battery
correctly. If the battery performance is still
poor, it is time to replace it.
WARNING
Use a genuine Brother rechargeable
battery (BCL-BT10). If not, it may cause
damage or personal injury.
CAUTION
DO NOT take off the white plastic that
covers the battery.
a
Press the area indicated (1) on the
battery cover (2) and slide it off the
cordless handset.
b
Remove the old battery and pull out the
connector.
c
Insert the connector (1) of the new
battery (2) in the direction shown below.
d
Place the battery in the correct position.
e
Slide the battery cover back on.
Note
• Be careful that you do not catch the
battery connector cord.
• After replacement, you should set the date
and time. (See Date and
Time on page 20.)
f
Charge the battery for 12 hours. (See
Charging the battery on page 24.)
1
2
1
2