Echo control, For non-color lcd models (base unit), For color lcd models (base unit) – Brother BCL-D10 User Manual
Page 32
Chapter 3
21
Echo Control
3
Under some conditions you may experience
an echo when using the cordless handset.
You can reduce or remove the echo by
choosing a level in the echo control setting
from the control panel of the machine (base
unit). It will take a moment for the level setting
to change. During this time you can not
answer a call.
For non-color LCD models (base unit)
3
a
Press Menu, 1, 8 on the control panel of
the machine (base unit).
b
Press a or b to choose level1,
level2
, level3 or level4.
Press OK.
c
Press Stop/Exit.
For color LCD models (base unit)
3
a
Press Menu on the control panel of the
machine (base unit).
b
Press a or b to choose
General Setup
.
Press OK.
c
Press a or b to choose
Echo Control
.
Press OK.
d
Do one of the following:
(MFC-845CW)
Press a or b to choose level1,
level2
, level3 or level4.
Press OK.
(MFC-885CW)
Press d or c to choose level1,
level2
, level3 or level4.
Press OK.
e
Press Stop/Exit.