beautypg.com

Using the clock/programmer - electric – Glen Dimplex Home Appliances Ltd Beiling Built-in Electric Microwave Oven 82757900 User Manual

Page 21

background image

Setting the time of day
Touch & hold the centre (function) icon for

a few seconds until the ● symbol between

the numbers on the LED display flashes.
While the ● symbol is flashing, you can

adjust the time of day by touching the

plus & minus icons. Please note: the hours

& minutes adjust quickly.
Important - once the time of day has

been set, allow approximately 30 seconds

before using any of the other programmer

functions. This ensures that the time of

day will remain correct.
Setting an alarm tone
Touch & hold the plus & minus icons

simultaneously until the ● symbol flashes

& you hear a beep - then touch the centre

(function) icon.
Touch the minus icon to select the tone.
You can change the tone by repeatedly

touching the minus icon - there are three

tones to choose from.
Setting the minute minder
To set the minute minder, touch & hold the

centre (function) icon until the bell symbol

appears & begins to flash. Important - the

flashing will last for approximately five

seconds, so any setting must be carried

out within this time frame.
Touch the plus & minus icons to set the

length of time required. Once this has

been done, the minute minder is set.
When the desired length of time has

counted down, the alarm will sound. To

cancel the tone, touch & hold any of the

icons.
To cancel the minute minder at any time,

touch & hold the plus & minus icons

together.

Semi-automatic cooking
Method 1 - duration (switch of after

set time period):
Touch & hold the centre (function) icon;

the bell will flash & you will hear a beep.

Touch the centre (function) icon again

- this will skip past the minute minder

function.
The display will flash the word ‘dur’ & the

‘A’ will flash on the left hand of the display.
Use the plus & minus icons to set the

length of time you want to cook for. The

flashing will last for approximately five

seconds, so the setting must be done

within this time frame or the time of day

will show again.
Once the duration has been set, the oven

will automatically switch off. When the set

time has elapsed the alarm will sound. To

switch the alarm off, touch any icon.
To view any remaining time, touch & hold

the centre (function) icon & touch again.
To cancel the semi-automatic programme

at any time, touch the plus & minus icons

together.
Method 2 - end time (switch off at a

set end time):
Touch & hold the centre (function) icon;

the bell will flash & you will hear a beep.

Touch the centre (function) icon again

- twice - this will skip past the minute

minder & duration functions.
The display will flash the word ‘End’ & the

‘A’ will flash on the left hand of the display.

USING THE CLOCK/PROGRAMMER - ELECTRIC