Belkin THUMB HUB F5U218-MOB - Manual (Page 7)

5
INSTALLATION
Important Note: Hi-Speed USB 2.0 hub drivers are included with most USB 2.0
PCI upgrade cards, and are pre-installed along with the PCI card drivers. If you
purchased an upgrade card prior to the release of Hi-Speed USB 2.0 hub support,
please check with your PCI card vendor for an updated USB 2.0 driver. The Belkin
Hi-Speed USB 2.0 driver supports all competitive cards based on the NEC host
controller with the exception of Adaptec. The most recent Belkin driver is available
at www.belkin.com.
4. Plug the USB A connector of the USB device, or an additional hub, into any
of the downstream ports of the Hub (see Fig. 4).
Important Note: When plugging a USB device into the Hub for the first time, it
may be necessary to reinstall the USB drivers for that device. Likewise, if you move
the device to another port on the Hub, it may be necessary to reinstall the drivers.