Briggs & Stratton 8 - Manual (Page 18)

18
H. Close and lock the fairlead roller assembly (Figure 19).
I. Proceed to next keeper roller on the arm. Continue to rotate arms
manually and be sure to extract cable from the reel, not from the slack
pulled out in step B.
J. Open quad keeper roller and lay cable in place as in step F. Close and
lock quad keeper roller as in step G (Figure 20).
K. Manually rotate arms to locate 3 double keeper rollers (Figure 21) in
sequence. Follow the procedure to open, lay in cable, and close as in steps
F and G (Figure 22).
L. Manually rotate arms to locate the final quad keeper roller and follow
the procedure to open, lay in cable and close as in steps F and G.
Figure 19. Close and Lock
Fairlead Roller
Figure 20. Place Cable In Next
Quad Keeper Roller
Figure 21. Locate 3 Double
Keeper Rollers
Figure 22. Place Cable In Double
Keeper Rollers