Nokia 6275i - Manual (Page 89)

56
Disable data storage connection
1. To disable the USB data cable, double-click the green arrow on the task bar at the
bottom of your PC screen.
A window pops up that displays Unplug or Eject Hardware.
2. Click on USB Device in the Hardware devices window.
A popup window displays Stop a Hardware device.
3. Highlight USB device, and click OK.
The popup window, Safe to Remove Hardware, is displayed with The ‘USB Device’
device can now be safely removed from the system.
4. Click OK.
Important: To ensure that all memory card operations are completed in a controlled
way, do not unplug the connectivity cable until Windows notifies you that it is safe to do
so. Uncontrolled completion or unexpected disruptions of the memory card operations
may cause the memory card and the information stored on it to become corrupted.
A corrupted memory card may have to be formatted before it can be used again.
When a memory card is formatted, all information on the card is permanently lost.
■ Enhancements
Select Menu > Settings > Enhancements. You can select an enhancement menu if the phone
is or has been connected to a compatible enhancement type. Depending on enhancement,
select from the following options:
Default profile—Choose the profile you wish to be automatically activated when a headset,
car kit, or loopset is connected.
Automatic answer—Answer calls automatically after one ring when a headset, car kit, loopset,
or charger is connected. Select On or Off.
Lights (for Handsfree or Charger only)—Choose to keep the phone lights always on, or to
shut off automatically after several seconds. Select On or Automatic.
If the Loopset is connected and recognized through the Pop-Port™ connector, the phone
automatically uses the Loopset.
TTY/TDD (network service)—Connect to a TTY/TDD device. Check with the manufacturer of
the TTY/TDD device for a connecting cable that is compatible with your phone. Check with
your service provider for availability and description of services.
■ Security
PIN code
The PIN code protects the UIM card from unauthorized access. The PIN code can be 4–8 digits in
length. After three successive incorrect entries, the PIN code is blocked. You need to enter the
personal unblocking key (PUK) code. See"Personal unblocking key (PUK) code," p. 58.