Nokia 6275i - Manual (Page 76)

43
Set frequency—Manually enter the frequency of a known radio station, and select OK. You
can also press * to set a frequency.
You can normally make a call or answer an incoming call while listening to the radio. During
the call, the volume of the radio is muted.
■ Voice recorder
You can record pieces of speech, sound, or an active call for up to 3 minutes. The recorder
cannot be used when a data call is active.
Record speech or sound
1. Select Menu > Media > Voice recorder.
2. To start the recording, select the record virtual button. To start the recording during a call,
select Options > Record. While recording a call, all parties to the call hear a faint beeping
sound about every 2 seconds. When recording a call hold the phone in the normal position
near your ear.
3. To end the recording, select the stop virtual button. The recording is saved in
Gallery > Recordings.
4. To listen to the latest recording, select Options > Play last recorded.
5. To send the last recording using a multimedia message, Bluetooth technology, or IR,
select Options > Send last recorded.
■ Equalizer
The equalizer enhances the sound quality when using Music player by amplifying or attenuating
frequency bands. There are five preset equalizer settings (Normal, Pop, Rock, Jazz, and Classical)
and two customizable settings.
Activate an equalizer set
Select Menu > Media > Equalizer, scroll to the desired equalizer setting, and select Activate.
Select Options > View to display the equalizer settings.
Create a custom equalizer set
1. Select Menu > Media > Equalizer.
2. Highlight a customizable setting, and select Options > Edit.
The selected set appears in the display with the bar on the far left highlighted. The bars
adjust frequencies, from the lowest (the far left bar) to the highest (the far right bar). The
higher the indicator on a particular bar, the more that frequency is amplified.
3. Scroll to adjust the frequencies. Select Save.
4. To rename the setting, select Options > Rename, enter a new name, and select OK.
5. To activate the setting, select Activate.