Nokia 500 Auto Navigation - Manual (Page 4)

4
■ First use
1. To switch on the device, slide the main power switch to the right.
In daily use, use the standby mode instead of switching the device off. This way
the device starts up faster. To set the device to (or to exit) the standby mode,
press and hold the power key for about 3 seconds.
2. When you are asked to calibrate the screen, tap and briefly press the displayed
crosshair with your finger. Repeat this as the crosshair moves around the
screen.
3. When you are asked to select the language, tap the desired language and .
The language is used for display texts and spoken navigation instructions.
4. Set the date and time (including time zone and daylight saving), and tap .
5. Carefully read and accept the displayed safety notice, and tap the right arrow.
The Navigator application starts and the map view is displayed. Now you can
start to use the device.
■ Set up Bluetooth connection
1. Switch on the navigation device and your compatible mobile phone.
2. Activate the Bluetooth feature on your phone. See the user guide of your
phone for instructions.
3. On the navigation device, press the menu key, and tap Phone .
4. When the device asks you to start pairing from your phone, set your phone to
search for Bluetooth devices, and select the navigation device (Nokia PND)
from the list of found devices on your phone.
5. Enter the passcode 0000 on your phone to pair and connect the navigation
device to it.
In some phones you may need to make the connection separately after pairing.
See the user guide of your phone for details.
6. When you are asked to download the contacts from your phone to the
navigation device, tap Yes if you want to use the contacts saved in your phone
with the navigation device.