Nokia Display Car Kit CK-600 - Manual (Page 42)

I n s t a l l a t i o n
42
2. Slide the display onto the connector part (2).
3. Set the display to the appropriate position (3).
To attach the display to the plate:
1. Press the ball hinge on the stand or plate into the socket on the
connector part of the display cable (1).
2. Slide the display onto the connector part (2).
3. Set the display to the appropriate position (3).
If you need to change the mounting, pull the connector part of the
display cable from the ball hinge. To detach the display, pull it from the
connector part.
3
2
1
3
2
1