Nokia Display Car Kit CK-600 - Manual (Page 27)

S e t t i n g s
27
incoming call. To set the time period after which the call is answered,
see the phone user guide.
To change the car kit language, select Language setting and the desired
language.
To view the software and hardware versions of the product, select
Product info . To scroll through the information, press the wheel
repeatedly.
To reset the car kit to the factory settings, select Restore factory
settings . Alternatively, switch on the car kit, and press and hold the
wheel for about 5 seconds.
Installation settings
The installation settings should only be changed by a qualified service
technician during the installation of the car kit. To adjust the settings,
press the wheel in the standby mode, and select
Settings > Installation .
To turn the built-in motion sensor on or off, select Ignition sensor and
the desired option.
To select the appropriate music output, select Music output and the
correct mode according to the car radio setup. For details, see
“Integration with a car radio system”, p. 32.