Beko BD-300 User Manual
Page 6
Installation
1. Choose a suitable site for the handset unit
Make sure it is not near to another telephone, nor to other electrical equipment.
2. Plug the mains power lead into the power jack on the base unit and plug the
telephone line cord into the telephone port.
3. Plug the mains adapter into a 230V AC, 50 Hz mains socket, with the switch on
the socket set to OFF
Note: The illustration of adaptor may vary from country to country.
4. Switch on mains power at the socket
5. Fit the battery in the handset(s)
6. Connect the base unit to the telephone line
Insert the battery pack as shown. Fit the battery compartment cover,
Sliding it until it clicks firmly into position.