Belkin F5D4075 - Manual (Page 6)

4
Table of Contents seCTions 1 2 3 4
INsTAllINg ANd seTTINg UP The AdAPTers
Powerline AV+ Networking Adapter
overview
Installation of the Powerline AV+ Networking Adapter takes only
seconds and does not require setting up long wires throughout
the house. Simply plug the units directly into any available wall
outlet and connect to any device with an Ethernet port. Users have
the option to randomly change the security password for their
powerline network.
hardware setup
1. Plug your network cable into the device’s RJ45 network adapter port.
2. Plug the other end of your network cable into the RJ45 port located at
the back of the Adapter.
3. Plug the power cable or wall adapter into the power connector
at the back of the Adapter.
4. Insert the power plug of your power cable or wall adapter directly into
a power outlet in the wall.
Note: do not plug the device into a UPs or power strip with surge
protection as they may filter the powerline signal.
5. Repeat this process for the second Adapter.