Turning on the power – Toshiba AT300 User Manual

Page 22

Text mode
Original mode

Figure 3-3 Connecting the AC adaptor 1

2-pin

3-pin

Plug the power connector of the power cable into the docking interface
on your tablet.

Figure 3-4 Connecting the AC adaptor 2

Plug the AC adaptor into a live wall outlet.

You can charge the tablet by connecting the power cable to a USB port on
a computer. However it is not recommended because it takes much longer
time to fully charge the battery.

Turning on the power

This section describes how to power up your tablet.
Press & hold Power button to turn on the tablet. The tablet will vibrate to
indicate the status.

Figure 3-5 Turn on the tablet

User's Manual

3-9