Toshiba Qosmio X300 - Manual (Page 39)

User’s Manual 2-3
The Grand Tour
Keep foreign metal objects, such as screws, staples and paper clips, out of
the ExpressCard slot and PC Card slot. Foreign metal objects can create
a short circuit, which can cause damage and fire, possibly resulting in
serious injury.
Universal Serial Bus
(USB 2.0) ports
Universal Serial Bus port, which comply with the
USB 2.0 standard. The ports with the icon ( )
have USB Sleep and Charge function.
eSATA/USB combo
port
eSATA/USB combo port supports the USB 2.0
and the eSATA function. The ports with the icon
( ) has USB Sleep and Charge.
Keep foreign metal objects, such as screws, staples and paper clips, out of
the USB connectors. Foreign metal objects can create a short circuit,
which can cause damage and fire, possibly resulting in serious injury.
Please note that it is not possible to confirm the operation of all functions
of all USB devices that are available. In view of this it may be noted that
some functions associated with a specific device might not operate
properly.
If you connect an eSATA device after the computer has already been
turned on, it will take about ten seconds for it to be recognized by the
computer.
Do not attempt to disconnect and reconnect the drive before this period
has elapsed.
A connected eSATA device may not be recognized if it is connected to the
computer's eSATA/USB combo port while the computer is in Sleep Mode
or Hibernation Mode. If this occurs, disconnect the eSATA device and then
reconnect the device while the computer is turned on.