Toshiba W3451 - Manual (Page 20)

English - 19 -
English
General Operation
Stereo and Bilingual Transmissions
If stereo or dual language broadcasts are transmitted, the
word Stereo or Dual will appear on the screen each time
positions are changed, disappearing after a few seconds. If
the broadcast is not in stereo, the word Mono will appear.
Stereo… Press “LANG - ” to select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are trans-
mitted, the word Dual will be displayed. Choose the required
programme number, and if the word Dual appears, press
“ LANG - ” to select Dual I, Dual II or Mono.
For DTV broadcasts
To view current language and for changing to an
alternative language (if available), press “ LANG -
” button. Available options will be listed.
Displaying Subtitles
In digital broadcasts, this feature will show subtitles
on the screen in the selected language provided they
are being broadcast.
Press
SUBTITLE button to turn the subtitles on. Press
SUBTITLE button again to turn the subtitles off.
Viewing Main Menu
Press + or - buttons on the TV at the same
time to view main menu.
Press
MENU button on the remote control to view
main menu.
Controlling Volume and Muting Sound
Volume
Press + or - button on the remote control to
adjust the volume.
Sound Mute
Press “ ” button once to turn the sound off and
again to cancel.
Selecting Programme Positions
To select a programme position use the numeric
buttons on the remote control. Programme positions
can also be selected using P or P buttons.
Press “ INFO - ” button to display the on-screen
information i.e. programme position, stereo/mono
signal and picture format.
Standby Notifications
If the TV switches off while in No Signal mode, the
following on-screen message will be displayed on the
next switch-on:
When the Auto TV OFF timeout is reached, the
following message will be displayed on the screen.
Select Yes to shut down the TV. Select No to cancel.
The TV will switch off as well, if you do not make a
selection on this screen.
If the TV switches off owing to the auto power down
feature, the following on-screen message will be
displayed on the next switch-on: