Auto tuning, English – Toshiba W3451 User Manual
Page 18
English - 17 -
English
Auto Tuning
As new services are broadcast, it will be necessary to
retune the television in order to view them.
• It is recommended to run Auto Tuning periodically
to ensure that all new services are added. Please
be aware that Auto Tuning will completely retune
the television and all current channels and settings
will be lost.
• Press
MENU button on the remote control and select
Install and Retune by using Left or Right button.
Press
OK button and the following menu screen
will be displayed.
• Select
Automatic Channel Scan (Retune) by using
Up or Down button and press OK button. Automatic
Channel Scan options will be displayed. You can
select options by using
Up or Down and OK buttons.
Auto Channel Scan Menu Operation
Digital Aerial: Searches and stores aerial DVB
stations.
Digital Cable: Searches and stores cable DVB
stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores
aerial DVB and analogue stations.
Digital Cable & Analogue: Searches and stores
cable DVB and analogue stations.
Note: Although this cable feature can be selected, it
is not fully supported in the UK. If cable signals are
input to this TV from a Cable Network Provider some
may be displayed.
• Whenever you select an automatic search type and
press
OK button, a confirmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using Left or Right
and
OK button.
• After auto channel scan type is set and selected
and confirmed, installation process will start and
progress bar will move along. The television will
Auto Tuning
search for all available stations. You must allow
the television to complete the search. Press
MENU
button to cancel the process. In such a case, located
channels are not stored.