Blodgett SN-5E - Manual (Page 9)

9
ELECTRICAL CONNECTIONS
Use copper wire suitable for at least 90 degrees Celsius. The steamer must be grounded. The
wiring diagram is located on the right side panel as you face the steamer.
PLUMBING CONNECTIONS
WARNING: Plumbing connections must comply with applicable sanitary,
safety and plumbing codes.
There is a 3/8" copper tube water line at the rear of the unit. Should your unit have the optional
split water lines, each will be marked to indicate condensate or boiler feed. The condensate
feed must be cold water and the boiler feed may be either cold or hot water. Providing hot
water feed to the generator will reduce recovery time during cooking.