Toshiba USB Port Replicator II - Manual (Page 3)

- 3-
Introduction
Thank you for ordering the USB Port-Replicator. The USB Port-Replicator is an
intelligent expansion module which connects to a PC or notebook via Universal Serial
Bus (USB) port, providing one high-speed RS-232 serial port, one printer port, one PS/2
keyboard & mouse and 4 downstream USB ports. The USB Port-Replicator features
easy connectivity for traditional serial devices, keyboard, mouse and other USB devices.
By simply plugging in an USB Port-Replicator, you will:
Add one high-speed serial port, one printer port, one PS/2 keyboard & mouse and
4 downstream USB ports to your PC or notebook in seconds.
Improve the inconvenience of configuring old PC solutions like card extension
solutions, which require to adjust IRQ or jumper settings and the incompatibility
of various brands of docking solution or bus repeater.
Avoid the hassle of removing your PC case, or rebooting the operating system
during installation.
System Requirements
A PC with a minimum of a 75MHz Pentium, or equivalent
A minimum of 16M bytes of RAM.
One available USB type A downstream port. (either UHCI or OHCI)
Windows 98 or later.
Package Contents
The product you purchase should contain the equipment and accessories shown as
follows:
USB DOCK converter
One 6 feet USB AB type cable
One 1.8A switching power adapter (optional)
One USB Port-Replicator driver and User’s manual CD