Toshiba Satellite NB10-A - Manual (Page 56)

6. Release the battery pack as shown below to remove it from the
computer.
Figure 4-3 Releasing the battery pack
1
1. Battery pack
Installing the battery pack
To install a battery pack, follow the steps as detailed below:
1.
Insert the battery pack as far as it will go into the computer.
2. Ensure that the battery pack is securely in place and secure it with two
screws.
3. Turn your computer over.
LAN
The computer may have built-in support for Ethernet LAN (10 megabits per
second, 10BASE-T) or Fast Ethernet LAN (100 megabits per second,
100BASE-TX).
This section describes how to connect/disconnect to a LAN.
Do not install or remove a memory module while Wake-up on LAN is
enabled.
The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this
feature.
The Link speed (10/100 megabits per second) changes automatically
depending on the network conditions (connected device, cable or
noise and so on).
LAN cable types
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer’s default settings could cause a
malfunction in LAN operation. Check with your LAN administrator regarding
set-up procedures.
User's Manual 4-11