Toshiba SD490 - Manual (Page 36)

36
Function setup
DivX ® Registration
Some DivX ® Video-On-Demand files required registration
code, please get the code of your DVD player as follow:
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
DivX Registration.
4) Press ENTER button, your registration code will be
shown.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Note
This registration code is for DivX
® Video-On-Demand only.
Do not apply this code for other applications or websites.
Screen Saver
To turn on or off the screen saver (screen protection
to prevent image burn).
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
Screen saver.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Note
When you leave the unit in DVD stop mode for approximately
2 minutes, the screen saver of the DVD player automatically
appears if you set the Screen saver to On mode. To turn off
the screen saver, press the PLAY button.
HDMI CEC
You can control this DVD unit from TV’s remote which is
connected via HDMI cable.
1) Press SETUP button.
2) Press / button to select Misc.
3) Press button, then use the / button to select
HDMI CEC.
4) Press ENTER button, then use the / button to
select the On or Off mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Functions available for the HDMI-CEC
• One touch play
When the operations with following buttons of this
unit’s remote control are performed, the TV will
automatically switch to appropriate input channel.
Button for one touch play: [PLAY] (make sure a disc
is inserted.)
• System information
Get & Set Menu Language:
This unit recognizes the OSD languages set for the
TV and automatically set the same language as the
player menu language (OSD menu language) for this
unit.
Power off:
When you turn the TV off, this unit will automatically
turn off.
Receiving operational signal from TV’s Remote:
You can operate this unit with TV’s remote control.
Check your TV owner’s manual for details.
Notes
• This function may not work properly depending on
the TV you are connecting.
• If the Video Out is not set to “HDMI”, HDMI-CEC will
not work.
• Other components must be compatible with HDMI-CEC in
order to use this function.
Off: To deactivate HDMI-CEC.
On: To activate HDMI-CEC.
Screen saver : On
DivX Video On Demand
Your registration code is :
R
HDMI CEC : Off
Screen saver Off
On
Screen saver : On
HDMI CEC Off
On
Customizing the Function Settings (continued)
Setting details